Post by allencodemo on Jan 8, 2015 9:27:11 GMT -5
Saturday, September 26 6pm
Allen County Fairgrounds – Scottsville, KY
Gate admission $15 Pit Pass $5 extra USE PIT GATE ONLY
$14,000 Total Prize Money.
Winner Gets a Large Wrestling Style Belt and Buckle
Limited to the first 60 Cars registration is now open.
Free Entry to any Past King of the Bluegrass winners.
Free Entry to anyone running the 2015 Allen County Spring Fling and Allen Co Fair Derbies
For free entry $100 must be received to save your spot, refund will be given when you show up with a car that night. Pass inspection and run a heat.
Entry Fee is $100 Till September 1st then $250. No free entry fee after September 1st.
Payment to be mailed to: Allen Co Jaycees, PO Box 665, Scottsville, KY 42164
Please include the Driver Name and Phone Number in the envelope.
First received First on the list.
Registration cannot be transferred.
By sending in your registration money you represent that you have read and understand all rules.
All cars must be on grounds by 4 PM 9-26-15 NO EXCEPTIONS
See www.allencojaycees.com for details and rules.
Call 270-237-1881 or 270-293-3091 for rule questions
1st Place $7500 2nd Place $2500 3rd Place $1000 4th Place $750 5th Place $250
Small Car Heat with $1350 purse. $800 $400 $150
Winner Gets a Large Wrestling Style Belt and Buckle
Small car registration is $25
Lawnmower Heat with $650 Purse. $500 $100 $50
Winner Gets a Large Wrestling Style Belt and Buckle
Lawnmowers registration is $20
Power Wheels Heat – Trophies - $10 Registration
2015 Allen County Big Car Preparation & Building
1. All cars must have a cage in order to run! Safety Precaution Only!!
2. Any Year Sedans and 1980 Newer Wagons only. No Imperials, Hearses, Roundback wagons or leaf sprung cars. No 2003 or newer cars or frames.
3. All glass, chrome molding, hood latches, gas tanks, and rear seats must be removed before cars arrive at the fairgrounds.
4. Stock type hood must be used. Hoods must be open for inspection. Hoods must be secured in 6 places with 2” by 2” x ¼ angle. NO longer than 6” with 3/8th bolts.
5. THE DRIVERS SIDE SEAT BELT MUST BE IN WORKING ORDER.
6. Gas tanks must be relocated behind driver’s seat, securely fastened and covered. Any visible leaking fuel will result in automatic disqualification. All plastic tanks must be in a steel enclosure. However, it cannot be bolted to strengthen the car. Gas tank protectors are allowed no wider than 24” and must be 2 inch off sheet metal in back so not to strengthen the car.
7. Radiators must stay in original location. May be wired on all four corners.
8. You may run electric fan.
9. Batteries must be moved to the passenger’s side floor board. The battery box cannot strengthen the car in any way. NO more than 2 batteries.
10. No welding on frames or body seams. This will be checked. No plated frames.
11. Cutting the ends off bumpers and fenders for clearance is permitted.
12. All cars must sit level within 5” with no car sitting lowers than 16” from the bottom of the bumpers or higher than 21” from the bottom of the bumpers. The bottom of the frame rail should be 13” to the ground. No wedge cars.
13. Sunroofs have to be covered, no exceptions. Any type of fan has to be covered.
14. Factory condensers only. They may be wired in, not welded.
15. A welded 4-point cage can be put around driver’s compartment. It has to be no bigger than 4x6 inches and can be welded to car but not excessively. The front bar has to be 5 inches from the firewall and tunnel. The back cage bar no further back than 12”s past driver/passenger door posts. You can wire cage to rails in 4 places using # 9 wire or 2” ratchet straps.
16. Factory body bolts and bushings must be stock
17. Motor swaps, rear end swaps, pulley protectors and engine cradles are allowed.
18. No distributor protectors are allowed at all.
19. You can use aftermarket steering column. After market tie rods, front sway bar on new model can be bolted to lower A-arm, not to be welded to frame.
20. Transmission coolers or oil coolers are allowed. No transmission protectors at all.
21. Front A-Arms can be welded with 2 inch wide by 4 inch long strap. 1 in the front of the A-Arm and 1 in the back of the A-Arm. Must be straight up and down. No exceptions. Do not wrap the A-Arm at all.
22. Any year factory bumpers which can be welded are allowed. Loaded factory bumpers are allowed, but no extreme pointed bumpers. 12” bumper shocks for new models must be inside frame rail. Old models can weld bumper bracket with one weld pass. You may modify a back bumper maximum ¼” thick of 2”x5” tubing. Back bumper cannot be loaded and ends cannot be capped. Must have factor skin.
23. Slip shaft are allowed with rear end braces but no kicker to rails.
24. Trunk lids can be welded with 8 plates, maximum of 6” long, 1/8th x 3 “thick material with 6” of space between them. Trunk needs to be standing up until after inspection then can swag with rear quarters to remain standing. Body creasing is allowed. Rear quarters are to remain square. Window bars are allowed from back glass to lower part of speaker deck, not to trunk lid in any way. This is for safety. It must be a factory car trunk lid with a 12” inspection hole cut into it!
25. Can pitch front rails by ONLY cutting outside flap and then pulling down and re-welding that flap with one pass of weld.
26. NO WELDING except bumpers and motor mounts.
27. Roll over bars are mandatory. Must be straight up and down.
28. You may use 1” all thread in core support or 1” max tubing in core support. No welding of the tubes down the side of the frame. The factory eye where the all thread is. Core support spacers can only be a maximum of a 5” spacer, this will be strictly enforced! May shorten rails 4” maximum in front of factory eye. Factory eye must remain in factory location.
29. Doors can be welded shut using 3” by 1/8” thick material. Weld 6” inches, skip 6” inches.
30. Rear End can be wired or strapped down. No all thread thru the rear or front coil springs. Can use blocks in the springs or rocker arms.
2015 Mini Car Preparation and Build
1. Wheelbase must not exceed 102” for RWD cars and 108” for FWD uni-body cars only. NO EXCEPTIONS.
2. No shortening “snubbing” of frames- front or back. No moving of axles to shorten wheel base.
3. Must be powered by four or six cylinder engines. NO V8s.
4. NO LEAFING MINI CARS- ex. (No adding of extra leafs to existing leafs. No coil to leaf spring conversions). No four-wheel drive vehicles.
5. NO HUMP PLATES
6. Stock gas tank MUST be removed. Gas tanks must be relocated behind driver’s seat, securely fastened and covered. Any visible leaking fuel will result in automatic disqualification. All plastic tanks must be in a steel enclosure. However, it cannot be bolted to strengthen the car.
7. All glass, chrome molding, hood latches, gas tanks, and rear seats must be removed before cars arrive at the fairgrounds.
8. Stock type hood must be used. Hoods must be open for inspection-and cannot be bent down in front of radiator. Hoods can be secured in 6 places with 2” by 2” x ¼ angle (NO longer than 6” with 3/8th bolts) or #9 wire in 6 places. You may use 1” all thread only in core support with 3” max spacer, but this will count as 2 of your 6 places! The factory rubber bushing between the sub-frame and frame must remain using the 1” all thread.
9. THE DRIVERS SIDE SEAT BELT MUST BE IN WORKING ORDER.
10. Radiators must stay in original location and can be wired on all four corners. You may run electric fan. Factory condensers only and they may be wired in, not welded.
11. Batteries must be moved to the passenger’s side floor board. The battery box cannot strengthen the car in any way. NO more than 2 batteries
12. No welding on frames or seams. This will be checked. No plated frames.
13. Cutting the ends off bumpers and fenders for clearance is permitted.
14. All cars must sit level within 5” with no car sitting lowers than 16” from the bottom of the bumpers or higher than 21” from the bottom of the bumpers.
15. Sunroofs must be covered, no exceptions.
16. CAGE or DRIVERS DOOR BAR IS MANDATORY!!! A welded 4-point cage can be put around driver’s compartment. It has to be no bigger than 4” x 6” inches and can be welded to car but not excessively. The front bar has to be 5” from the firewall and tunnel. Back cage bar no further back than 12”s past driver/passenger door posts. NO KICKERS AT ALL OF ANY KIND (OUTER, INNER, DOWN, OR UP)! Roll over bars are mandatory! Roll over bar must be straight up and down. Gas tank can sit on or in a steel protector coming off the back cage bar but not touch any sheet metal. Must be “floating”. Gas tank proctors size cannot exceed more than 2” in length or width of standard fuel cell/gas tank. Standard Size fuel cell measurements are: 12" long x 10" wide so add 2”s to each and that will be recommended size. NO EXCESSIVE PROTECTOR!!
17. Motor swaps and rear end swaps are allowed. Slip shafts are allowed.
18. No protectors at all.
19. You can use aftermarket steering column, after market tie rods. Front sway bar cannot be welded.
20. Transmission coolers or oil coolers are allowed. No transmission protectors at all.
21. Any year factory bumpers which can be welded are allowed. Loaded factory bumpers or homemade (McCollum/DEC type) bumpers are allowed, but no extreme pointed bumpers, you will either cut the extreme point off or grind it down. Bumper shocks not to exceed 12” and must be inside frame. Bumper shocks will be measured from back of bumper where the shocks are mounted/bolted/welded!
22. Doors and trunk seams can be welded solid using no bigger than 3" strapping by 1/8th inch thick material. No re-enforcing body panels. Trunk must have open 12” hole to see inside. Body creasing and pre-bending is allowed. No wedge cars, quarter panels must remain up. 1 window bar is allowed from top of roof , not to exceed 6" from back glass and down to trunk but not to exceed 6" from back of speaker deck. Back window bar can not touch rollover bar. This is for safety only!
23. NO WELDING except bumpers, door/trunk seam and motor mounts
Read more: kydemoderby.proboards.com/thread/610/king-bluegrass-september-26#ixzz3OEw2kiGn
Allen County Fairgrounds – Scottsville, KY
Gate admission $15 Pit Pass $5 extra USE PIT GATE ONLY
$14,000 Total Prize Money.
Winner Gets a Large Wrestling Style Belt and Buckle
Limited to the first 60 Cars registration is now open.
Free Entry to any Past King of the Bluegrass winners.
Free Entry to anyone running the 2015 Allen County Spring Fling and Allen Co Fair Derbies
For free entry $100 must be received to save your spot, refund will be given when you show up with a car that night. Pass inspection and run a heat.
Entry Fee is $100 Till September 1st then $250. No free entry fee after September 1st.
Payment to be mailed to: Allen Co Jaycees, PO Box 665, Scottsville, KY 42164
Please include the Driver Name and Phone Number in the envelope.
First received First on the list.
Registration cannot be transferred.
By sending in your registration money you represent that you have read and understand all rules.
All cars must be on grounds by 4 PM 9-26-15 NO EXCEPTIONS
See www.allencojaycees.com for details and rules.
Call 270-237-1881 or 270-293-3091 for rule questions
1st Place $7500 2nd Place $2500 3rd Place $1000 4th Place $750 5th Place $250
Small Car Heat with $1350 purse. $800 $400 $150
Winner Gets a Large Wrestling Style Belt and Buckle
Small car registration is $25
Lawnmower Heat with $650 Purse. $500 $100 $50
Winner Gets a Large Wrestling Style Belt and Buckle
Lawnmowers registration is $20
Power Wheels Heat – Trophies - $10 Registration
2015 Allen County Big Car Preparation & Building
1. All cars must have a cage in order to run! Safety Precaution Only!!
2. Any Year Sedans and 1980 Newer Wagons only. No Imperials, Hearses, Roundback wagons or leaf sprung cars. No 2003 or newer cars or frames.
3. All glass, chrome molding, hood latches, gas tanks, and rear seats must be removed before cars arrive at the fairgrounds.
4. Stock type hood must be used. Hoods must be open for inspection. Hoods must be secured in 6 places with 2” by 2” x ¼ angle. NO longer than 6” with 3/8th bolts.
5. THE DRIVERS SIDE SEAT BELT MUST BE IN WORKING ORDER.
6. Gas tanks must be relocated behind driver’s seat, securely fastened and covered. Any visible leaking fuel will result in automatic disqualification. All plastic tanks must be in a steel enclosure. However, it cannot be bolted to strengthen the car. Gas tank protectors are allowed no wider than 24” and must be 2 inch off sheet metal in back so not to strengthen the car.
7. Radiators must stay in original location. May be wired on all four corners.
8. You may run electric fan.
9. Batteries must be moved to the passenger’s side floor board. The battery box cannot strengthen the car in any way. NO more than 2 batteries.
10. No welding on frames or body seams. This will be checked. No plated frames.
11. Cutting the ends off bumpers and fenders for clearance is permitted.
12. All cars must sit level within 5” with no car sitting lowers than 16” from the bottom of the bumpers or higher than 21” from the bottom of the bumpers. The bottom of the frame rail should be 13” to the ground. No wedge cars.
13. Sunroofs have to be covered, no exceptions. Any type of fan has to be covered.
14. Factory condensers only. They may be wired in, not welded.
15. A welded 4-point cage can be put around driver’s compartment. It has to be no bigger than 4x6 inches and can be welded to car but not excessively. The front bar has to be 5 inches from the firewall and tunnel. The back cage bar no further back than 12”s past driver/passenger door posts. You can wire cage to rails in 4 places using # 9 wire or 2” ratchet straps.
16. Factory body bolts and bushings must be stock
17. Motor swaps, rear end swaps, pulley protectors and engine cradles are allowed.
18. No distributor protectors are allowed at all.
19. You can use aftermarket steering column. After market tie rods, front sway bar on new model can be bolted to lower A-arm, not to be welded to frame.
20. Transmission coolers or oil coolers are allowed. No transmission protectors at all.
21. Front A-Arms can be welded with 2 inch wide by 4 inch long strap. 1 in the front of the A-Arm and 1 in the back of the A-Arm. Must be straight up and down. No exceptions. Do not wrap the A-Arm at all.
22. Any year factory bumpers which can be welded are allowed. Loaded factory bumpers are allowed, but no extreme pointed bumpers. 12” bumper shocks for new models must be inside frame rail. Old models can weld bumper bracket with one weld pass. You may modify a back bumper maximum ¼” thick of 2”x5” tubing. Back bumper cannot be loaded and ends cannot be capped. Must have factor skin.
23. Slip shaft are allowed with rear end braces but no kicker to rails.
24. Trunk lids can be welded with 8 plates, maximum of 6” long, 1/8th x 3 “thick material with 6” of space between them. Trunk needs to be standing up until after inspection then can swag with rear quarters to remain standing. Body creasing is allowed. Rear quarters are to remain square. Window bars are allowed from back glass to lower part of speaker deck, not to trunk lid in any way. This is for safety. It must be a factory car trunk lid with a 12” inspection hole cut into it!
25. Can pitch front rails by ONLY cutting outside flap and then pulling down and re-welding that flap with one pass of weld.
26. NO WELDING except bumpers and motor mounts.
27. Roll over bars are mandatory. Must be straight up and down.
28. You may use 1” all thread in core support or 1” max tubing in core support. No welding of the tubes down the side of the frame. The factory eye where the all thread is. Core support spacers can only be a maximum of a 5” spacer, this will be strictly enforced! May shorten rails 4” maximum in front of factory eye. Factory eye must remain in factory location.
29. Doors can be welded shut using 3” by 1/8” thick material. Weld 6” inches, skip 6” inches.
30. Rear End can be wired or strapped down. No all thread thru the rear or front coil springs. Can use blocks in the springs or rocker arms.
2015 Mini Car Preparation and Build
1. Wheelbase must not exceed 102” for RWD cars and 108” for FWD uni-body cars only. NO EXCEPTIONS.
2. No shortening “snubbing” of frames- front or back. No moving of axles to shorten wheel base.
3. Must be powered by four or six cylinder engines. NO V8s.
4. NO LEAFING MINI CARS- ex. (No adding of extra leafs to existing leafs. No coil to leaf spring conversions). No four-wheel drive vehicles.
5. NO HUMP PLATES
6. Stock gas tank MUST be removed. Gas tanks must be relocated behind driver’s seat, securely fastened and covered. Any visible leaking fuel will result in automatic disqualification. All plastic tanks must be in a steel enclosure. However, it cannot be bolted to strengthen the car.
7. All glass, chrome molding, hood latches, gas tanks, and rear seats must be removed before cars arrive at the fairgrounds.
8. Stock type hood must be used. Hoods must be open for inspection-and cannot be bent down in front of radiator. Hoods can be secured in 6 places with 2” by 2” x ¼ angle (NO longer than 6” with 3/8th bolts) or #9 wire in 6 places. You may use 1” all thread only in core support with 3” max spacer, but this will count as 2 of your 6 places! The factory rubber bushing between the sub-frame and frame must remain using the 1” all thread.
9. THE DRIVERS SIDE SEAT BELT MUST BE IN WORKING ORDER.
10. Radiators must stay in original location and can be wired on all four corners. You may run electric fan. Factory condensers only and they may be wired in, not welded.
11. Batteries must be moved to the passenger’s side floor board. The battery box cannot strengthen the car in any way. NO more than 2 batteries
12. No welding on frames or seams. This will be checked. No plated frames.
13. Cutting the ends off bumpers and fenders for clearance is permitted.
14. All cars must sit level within 5” with no car sitting lowers than 16” from the bottom of the bumpers or higher than 21” from the bottom of the bumpers.
15. Sunroofs must be covered, no exceptions.
16. CAGE or DRIVERS DOOR BAR IS MANDATORY!!! A welded 4-point cage can be put around driver’s compartment. It has to be no bigger than 4” x 6” inches and can be welded to car but not excessively. The front bar has to be 5” from the firewall and tunnel. Back cage bar no further back than 12”s past driver/passenger door posts. NO KICKERS AT ALL OF ANY KIND (OUTER, INNER, DOWN, OR UP)! Roll over bars are mandatory! Roll over bar must be straight up and down. Gas tank can sit on or in a steel protector coming off the back cage bar but not touch any sheet metal. Must be “floating”. Gas tank proctors size cannot exceed more than 2” in length or width of standard fuel cell/gas tank. Standard Size fuel cell measurements are: 12" long x 10" wide so add 2”s to each and that will be recommended size. NO EXCESSIVE PROTECTOR!!
17. Motor swaps and rear end swaps are allowed. Slip shafts are allowed.
18. No protectors at all.
19. You can use aftermarket steering column, after market tie rods. Front sway bar cannot be welded.
20. Transmission coolers or oil coolers are allowed. No transmission protectors at all.
21. Any year factory bumpers which can be welded are allowed. Loaded factory bumpers or homemade (McCollum/DEC type) bumpers are allowed, but no extreme pointed bumpers, you will either cut the extreme point off or grind it down. Bumper shocks not to exceed 12” and must be inside frame. Bumper shocks will be measured from back of bumper where the shocks are mounted/bolted/welded!
22. Doors and trunk seams can be welded solid using no bigger than 3" strapping by 1/8th inch thick material. No re-enforcing body panels. Trunk must have open 12” hole to see inside. Body creasing and pre-bending is allowed. No wedge cars, quarter panels must remain up. 1 window bar is allowed from top of roof , not to exceed 6" from back glass and down to trunk but not to exceed 6" from back of speaker deck. Back window bar can not touch rollover bar. This is for safety only!
23. NO WELDING except bumpers, door/trunk seam and motor mounts
Read more: kydemoderby.proboards.com/thread/610/king-bluegrass-september-26#ixzz3OEw2kiGn