Post by jw68 on Aug 10, 2015 1:17:28 GMT -5
September 26th 2015
Stock big cars and stock mini cars
Promoter is John Peck. Rules can be found on his Facebook page.
Big car stock payout 1st- 2000, 2nd- 1000, 3rd- 400, 4th- 200. Mad dog- 200+ trophy
Mini stock car payout 1st-600, 2nd-300, 3rd-100 Mad dog-trophy
Any questions can contact John Peck at
859-393-8693
Top Dog Promotions "Stock" Big Car Class Rules for CORYDON INDIANA
1980 and Newer Class!! There aren't ALOT of RULES but follow them ALL!!
1 Car has to be factory!!! You cant change ANYTHING. Only exceptions are....
2 Must remove glass and plastic from cars
3 You can run any tire
4 You can weld rear ends AND have a gear! Car must have the FACTORY rear end under it!!!!
5 Wire doors, trunk,and hood in 6 spots. 3 strands at each point. NO welding!!
6 Gas tank and battery can be moved into the floor boards but have to be secured!
7 NO CREASING THE BODY OR FRAME!! There will be TIME at the TRACK when you can CREASE BODY ONLY!! SHORT PERIOD FOR ALL.
8 Frame can be notched
9 You can run ANY stock car bumper and it can be loaded. NO homemade bumpers and it CAN NOT be just the skin!!
10 Bumpers can be welded on. Single pass weld only! Factory shocks to that car and CAN NOT BE EXTENDED AND WELDED or no shock at all.
The car CAN NOT be SHORTENED AT ALL!!! NO EXCEPTIONS!
11 One single bar can be welded behind the seat. Has to be with in 12" of seat. NO EXCEPTIONS! Max bar is 4" x 4" with a 6" end plate! gas tank can be welded to back bar but CAN NOT BE USED IN ANY WAY AS A PROTECTOR! YOU CAN WELD A ROLL BAR STRAIGHT UP AND OVER!! CAN NOT FASTEN TO THE ROOF IN ANYWAY!! ITS FOR SAFETY NOT STRENGTH!!!
12 YOU CAN HAVE MOTOR and TRANSMISSION SWAPS! Factory Motor mounts only! NO homemade or solid mounts! Mounts can be welded.
13 You can move the cross member but it has to be welded back with factory mounting.
14 You can build a drive shaft. NO SLIP SHAFTS!
15 Fire Wall can be cut out.
16. Suspension must have travel. NO SOLID SUSPENSION'S
17. You CAN NOT CHANGE spindles,tie rod's,A arms, ball joints ect....
18 No watts link conversion or any reason on 98 and up...Have to run Factory rear ends!!
19 You can run a shifter BUT YOU CAN NOT RUN a after market steering wheel or you CAN NOT run Homemade brake or gas pedal. Has to be Factory!!
20 NO FRAME WELDING AT ALL!! ONLY SPOTS ARE BUMPERS AND FACTORY MOTOR MOUNTS.
21 I'M SURE THERE ARE WHOLES IN THIS AND QUESTIONS!! YOU BETTER CALL FIRST OR YOU COULD BE LEFT ON THE TRAILER!!
ITS STOCK.... SO NO REASON TO CHANGE ANYTHING NOT LISTED!!
Any Questions call FIRST!
ALL TOP DOG RULES APPLY!!!
John 859-393-8693
Top Dog Promotions 2015 Mini Car Bone Stock Class
1 Car must remain Stock except....
2 No full frame cars! No AMC'S
3 Rear Wheel Drive 105.5" Front Wheel Drive 109"
4 4 or 6 cylinder only
5 Suspension stock and bounce
6 Any Tire
7 Weld or wire doors 5" on 5" off.
8 Weld Car Bumper on
9 Bumper shock no more than 8" pc of 2x2 Square tubing.
10. 4 bar floating cage
11. Only do these things!
12 THERE AREN'T ALOT OF RULES BUT FOLLOW THEM ALL AND DO NOT DO ANYTHING ELSE!! YOU WILL NOT PASS INSPECTION!! Any questions at all call first.
John Peck 859-393-8693
Top Dog Promotions 2015 Mini Car Circle Track Race
1 Must remove all glass and plastic from car
2 Car must be less than 109 inch wheel base from factory and 4 or 6 cylinder.
3 If running a stock gas tank it must be in front of the back wheels
4 You can build a cage in the car and weld the door seems.
5 You can build a homemade bumper but it cant be wider than the front of the car and it has to be built safely!
6 It is a race not a derby! You will be DQ'ed if not racing. Must listen to judges
7 No arguing or unsafe driving in the pits
8 .no wheel protectors outside the wheels
9 No sharp or pointed pieces made or outside the car that is unsafe.
10 No 4x4 or All wheel drives!
Questions call John Peck 859-393-8693
Stock big cars and stock mini cars
Promoter is John Peck. Rules can be found on his Facebook page.
Big car stock payout 1st- 2000, 2nd- 1000, 3rd- 400, 4th- 200. Mad dog- 200+ trophy
Mini stock car payout 1st-600, 2nd-300, 3rd-100 Mad dog-trophy
Any questions can contact John Peck at
859-393-8693
Top Dog Promotions "Stock" Big Car Class Rules for CORYDON INDIANA
1980 and Newer Class!! There aren't ALOT of RULES but follow them ALL!!
1 Car has to be factory!!! You cant change ANYTHING. Only exceptions are....
2 Must remove glass and plastic from cars
3 You can run any tire
4 You can weld rear ends AND have a gear! Car must have the FACTORY rear end under it!!!!
5 Wire doors, trunk,and hood in 6 spots. 3 strands at each point. NO welding!!
6 Gas tank and battery can be moved into the floor boards but have to be secured!
7 NO CREASING THE BODY OR FRAME!! There will be TIME at the TRACK when you can CREASE BODY ONLY!! SHORT PERIOD FOR ALL.
8 Frame can be notched
9 You can run ANY stock car bumper and it can be loaded. NO homemade bumpers and it CAN NOT be just the skin!!
10 Bumpers can be welded on. Single pass weld only! Factory shocks to that car and CAN NOT BE EXTENDED AND WELDED or no shock at all.
The car CAN NOT be SHORTENED AT ALL!!! NO EXCEPTIONS!
11 One single bar can be welded behind the seat. Has to be with in 12" of seat. NO EXCEPTIONS! Max bar is 4" x 4" with a 6" end plate! gas tank can be welded to back bar but CAN NOT BE USED IN ANY WAY AS A PROTECTOR! YOU CAN WELD A ROLL BAR STRAIGHT UP AND OVER!! CAN NOT FASTEN TO THE ROOF IN ANYWAY!! ITS FOR SAFETY NOT STRENGTH!!!
12 YOU CAN HAVE MOTOR and TRANSMISSION SWAPS! Factory Motor mounts only! NO homemade or solid mounts! Mounts can be welded.
13 You can move the cross member but it has to be welded back with factory mounting.
14 You can build a drive shaft. NO SLIP SHAFTS!
15 Fire Wall can be cut out.
16. Suspension must have travel. NO SOLID SUSPENSION'S
17. You CAN NOT CHANGE spindles,tie rod's,A arms, ball joints ect....
18 No watts link conversion or any reason on 98 and up...Have to run Factory rear ends!!
19 You can run a shifter BUT YOU CAN NOT RUN a after market steering wheel or you CAN NOT run Homemade brake or gas pedal. Has to be Factory!!
20 NO FRAME WELDING AT ALL!! ONLY SPOTS ARE BUMPERS AND FACTORY MOTOR MOUNTS.
21 I'M SURE THERE ARE WHOLES IN THIS AND QUESTIONS!! YOU BETTER CALL FIRST OR YOU COULD BE LEFT ON THE TRAILER!!
ITS STOCK.... SO NO REASON TO CHANGE ANYTHING NOT LISTED!!
Any Questions call FIRST!
ALL TOP DOG RULES APPLY!!!
John 859-393-8693
Top Dog Promotions 2015 Mini Car Bone Stock Class
1 Car must remain Stock except....
2 No full frame cars! No AMC'S
3 Rear Wheel Drive 105.5" Front Wheel Drive 109"
4 4 or 6 cylinder only
5 Suspension stock and bounce
6 Any Tire
7 Weld or wire doors 5" on 5" off.
8 Weld Car Bumper on
9 Bumper shock no more than 8" pc of 2x2 Square tubing.
10. 4 bar floating cage
11. Only do these things!
12 THERE AREN'T ALOT OF RULES BUT FOLLOW THEM ALL AND DO NOT DO ANYTHING ELSE!! YOU WILL NOT PASS INSPECTION!! Any questions at all call first.
John Peck 859-393-8693
Top Dog Promotions 2015 Mini Car Circle Track Race
1 Must remove all glass and plastic from car
2 Car must be less than 109 inch wheel base from factory and 4 or 6 cylinder.
3 If running a stock gas tank it must be in front of the back wheels
4 You can build a cage in the car and weld the door seems.
5 You can build a homemade bumper but it cant be wider than the front of the car and it has to be built safely!
6 It is a race not a derby! You will be DQ'ed if not racing. Must listen to judges
7 No arguing or unsafe driving in the pits
8 .no wheel protectors outside the wheels
9 No sharp or pointed pieces made or outside the car that is unsafe.
10 No 4x4 or All wheel drives!
Questions call John Peck 859-393-8693