|
Post by mountainman55 on Feb 26, 2014 12:32:08 GMT -5
This is for the fans or spectators who want to go watch, THESE DATES ARE NOT FOR SURE, I have looked up dates for the county fairs in and around Lexington (an hour or so away or less) and checked the day they had the derby in 2013, then converted it to 2014. I really hope this helps derby fans like myself and like I said, THESE DATES ARE NOT SET IT STONE!! THEY ARE A ROUGH GUESS! But most fairs do not change the nights they have the derby, i will post them in date order, I will also post the best address i could find (some fairground addresses are really hard to get)Also, if you know of a date or address that i got wrong, please let me know, to help me and all others who view this
Boyle County Fair Thursday, May 29th 557 N Danville Bypass, Danville, KY
Woodford County Fair Saturday, June 7th 293 Beasley Road, Versailles, KY
Clark County Fair Saturday, June 21st 4980 Ironworks Road, Winchester, KY
Bourbon County Fair Monday, June 23rd 30 Legion Road, Paris, KY
Garrard County Fair Tuesday, June 24th 7786 Lexington Road, Lancaster, KY
Lincoln County Fair Wednesday, July 2nd US Highway 27 S, Stanford, KY
Jessamine County Fair Wednesday, July 9th 400 Park Drive, Nicholasville, KY
Harrison County Fair Friday, July 11th 2500 U.S. 27, Cynthiana, KY
Franklin County Fair Saturday, July 19th U.S. 460, Lakeview Park, Frankfort, KY
Grant County Fair Saturday, August 2nd 115 Baton Rouge Road, Williamstown, KY
|
|
|
Post by mountainman55 on Feb 27, 2014 7:29:31 GMT -5
Also, I will periodically check these fairs websites to get an exact date and try to get a more exact address and will continue to update this, I really hope this helps people out as I put quite a bit of time into preparing this, also if it is not too much to ask, if you view this please answer the poll, you can answer honestly, i would just like to know for future reference
|
|
|
Post by mountainman55 on Feb 28, 2014 8:31:43 GMT -5
as of right now, no dates have changed, 3/7/2014
|
|
|
Post by carrier on Mar 25, 2014 23:45:00 GMT -5
Also, I will periodically check these fairs websites to get an exact date and try to get a more exact address and will continue to update this, I really hope this helps people out as I put quite a bit of time into preparing this, also if it is not too much to ask, if you view this please answer the poll, you can answer honestly, i would just like to know for future reference
|
|
|
Post by rollin on Mar 25, 2014 23:58:40 GMT -5
can you post the rules on the boyle modified mini if there is going to be a modified class
|
|
|
Post by mountainman55 on Mar 26, 2014 6:50:03 GMT -5
idk if they are running modified mini, their rules from last year only have it for mod big, semi stock big, and semi stock mini. I will keep checking to see when they update their website for 2014 from 2013
|
|
|
Post by rollin on Mar 26, 2014 21:32:38 GMT -5
ok thanks i might just have to find me a stock car to run to
|
|
wpr67
New Member
Posts: 48
|
Post by wpr67 on Mar 27, 2014 7:37:16 GMT -5
They are changing their rules this year pretty sure their going with Top dog stock rules
|
|
|
Post by rollin on Apr 11, 2014 23:25:15 GMT -5
does anyone know forsure if the mini class is topdog stock rules or modified for boyle county fair
|
|
|
Post by mountainman55 on Apr 14, 2014 7:47:54 GMT -5
I will check their website right now to see if their rules are updated
|
|
|
Post by mountainman55 on Apr 14, 2014 7:49:43 GMT -5
according to the website it is small car modified, and it is updated to 2014
Modified Rules (Small Cars)
1. Any year car. 2. If you break a rule, you lose that rule. 3. Motor swaps are allowed. 4. You may tilt the front end, you may weld the frame with a single pass weld-Do not add any extra metal. 5.You may run solid suspension, only 2 straps per side on “A” arm -maximum of 3′ x 1/4′ x 10′ long has to run with “A” arms 6. Gas tank protectors allowed, no wider than 30 inches. It can go back to firewall, but do not beat or push sheet metal back. also all gas tanks must have back flow valve on vent side. 7. Doors and trunk can be wired or welded solid-must have (2) 8 inch holes 4 inches from quarter panel, dead center on trunk lid (on top of the trunk lid) for inspection and to see all 4 corners. No more than 1 inch overlapping with maximum 3 inch wide straps. 8. Front windshield bar is MANDATORY. No bar is allowed behind distributor protector or in front of cowl. 9. You may run 2 back windshield bars, but car cannot go more than 3 inches past rear windshield and 3 inches past rain channels. Back bar no more than 3 inches wide and 1/2 inch thick. 10. Four point cage allowed. Back bar no further back than 12 inches past driver’s seat. Side bars no further back than 1/2 way of the back doors. No halo bars. Front bar must be a minimum of 5 inches from firewall. 11. Center bar will be allowed, but cannot extend past front or back bar of cage. 12. Gas pedal cannot be used as a kicker. 13. You may replace body bolts with 1 inch all thread. All thread must be inside frame (includes nut, bolt, and washer) with 1 inch gap between body and frame. 14. Any year factory bumper allowed, special bumpers also allowed. However, no homemade pointy bumper of any kind allowed. You can weld bumper seams, weld straight to the frame, bumper shocks no longer than 2 1/2 x 2 1/2 x 12 in. You can reinforce front bumper ONLY on any year car. NOTE: Tech officials reserve the right to drill holes if the need arises during inspection. 15. Bumper height no height than 21 inches in front and no lower than 16 inches in back. Bumpers will be measured from bottom of the bumper to the ground. 16. You may run a distributor protector and 1 set of hump plates. Plates no longer than 22 inches and no thicker than 1/4 inch, plate must be conformed to frame in center of humps. 17. You may run one or the other A: Distributor protector kicker B:2 kickers down behind A frame, no bigger than 2×2. you cannot run both. If you run distributor protector and 2 kickers down behind A frame, then no kicker behind distributor protector. 18. You may run a slip shaft. 19. Fan must be covered by hood. Batteries must be covered and secured. 20. You can wire bumper in 4 spots 21. You can use up to 1 inch all thread in core support. Core support mount you can used 1/4 inch angle no longer than 6 inches. 22. You may run angle iron along radiator support with a maximum 1/4 inch x 3inx3inx30in, but cannot touch all thread. 23. You can wire or bolt hood up to a maximum of 6 spots with a maximum of 1 inch all thread, however we must be able to access engine in case of fire. 24. You can run a rear-end protector, but it cannot reinforce the car in any way. 25. No double skinning the body panels. No chains-except 1 chain per side from the head to the engine cradle, no longer than 12 inches and 3/8 inch thick. You may weld motor mounts within 3 inches of factory location. Refer to rule 17 A for kicker explanation. 26. No welding of interior body seams 27. You may plate pre-ran car with 2 plates per bend, with a maximum of 6 plates- 3x3inches no thicker than 1/4 in plate. Must be able to see where car was bent or broken. 28. You can weld frame seams (single pass) from crush box forward, no wider than 1/2 inch weld 29. Roll over bar must be straight up and down 30. You can use up to (20) 5 1/16 inch bolts around cut out of hood. You are allowed a maximum of 5 (5 1/6inch) bolts in each fender well. 31. Any additional welding, bracing or bolting wheel disqualifies car. NOTE: with the exception to the rear end mounting-which should not have excessive welding. 32. No leaf spring conversion. If car came with leaf springs then leaf springs on car must be OEM. 33. 4 down legs from cage to frame (front or back) – not in crush box or humps.
Boyle co fair is not responsible for lost, stolen, or damaged items or property at any event. Boyle co fair is not responsible for any accidents, or injuries of any type at any event. Boyle co fair reserves the right to reject any entry for any or no reason.
Any questions contact: Chris Goodlett 859-613-3515
|
|
|
Post by mountainman55 on Apr 14, 2014 7:50:15 GMT -5
|
|
|
Post by mountainman55 on Apr 14, 2014 7:50:43 GMT -5
Thursday May 29, 2014 7:30 p.m. Inspection Starting @ 3:00-6:00 p.m.
PAYOUTS Big Car Stock 1. $800.00 2. $500.00 3. $200.00
Small Car Modified 1. $600.00 2. $300.00 3. $100.00
Entry Fee: $50.00
|
|
|
Post by rollin on Apr 14, 2014 15:21:45 GMT -5
ok thanks i was hoping for a modified derby
|
|
|
Post by hoskins2 on May 16, 2014 9:23:21 GMT -5
woodford county is june 21st i will be there with 2 cars
|
|