Post by ky78 on Mar 11, 2013 15:58:19 GMT -5
BEE SPRING MOTORSPORTS Mini Car Demolition Derby
Saturday; April 6th @ 5 PM CST
$1500 Purse
(based on 20 cars)
1st Place - $800 ~ 2nd Place - $400 ~ 3rd Place - $300
$40 Entry Fee
$500 PURSE STOCK MINI CAR DEMO
1ST - $250 ~ 2ND - $150 ~ 3RD - $100
$40 Entry Fee (based on 10 cars)
LawnMower Racing & LawnMower demolition derby ~ 100% Payback
Gates open at Noon
Gate Admission: $8
Ages 6 – 12 ~ $5
5 & Under ~ Free
For more information, please call Elvis Lindsey 270-246-1432
"LIKE" Bee Spring MotorSports on Facebook for updates
BEE SPRING MOTORSPORTS BIG CAR MODIFIED DEMOLTION DERBY RULES
~ Any year sedan or wagon (NO sedagons or imperials)
1. Helmet, eye protection, and seat belts must be worn at all times.
2. Long sleeve shirts are required.
3. Max 5 mph in pit area.
4. ANY problems/misunderstanding/or protest must be addressed before the drivers meeting.
5. Any questions, call first. IF IT DON’T SAY YOU CAN DO IT, DON’T DO IT!!!
6. Officials decisions are final!
7. All glass, plastic, and interior must be removed before arriving at the derby.
8. NO ALCOHOL ALLOWED ON PREMISSIS!!
9. ANY DRIVER, PIT CREW, FAMILY MEMBER, GIRLFRIEND/BOYFRIEND, ETC THAT FIGHTS OR ARGUES WITH ANY OFFICIAL OR OTHER DRIVERS WILL CAUSE THEIR CAR AND DRIVER TO BE DISQUALIFIED AND ESCORTED OUT!
10. You are allowed 8 plates per car!! If any more are found, you will cut them!!
11. Hump plates must be max 22-inch long x max ¼-inch thick and contour to the frame.
12. Kickers allowed to A-frame OR distributor protector. From dash bar to top side of frame behind A-arms OR a kicker from dash bar to distributor protector. Cannot be attached to distributor protector.
13. Can change body bolts. Must be a 1-inch gap between body and frame.
14. All-thread through cradle and hood.
15. Can run loaded bumpers, any style bumper. No extreme points must be less than 8-inch point from front flat surface.
16. Can weld seams from A-frame out.
17. Can run 12-inch bumper shocks. Must stay inside the frame.
18. No pinning of the frames.
19. Can lock suspension by welding A-frame solid.
20. Tilt fords by cutting flap and re-welding only.
21. Can run solid suspension in the back, cannot convert coil to leaf springs.
22. NO wedged cars. Must be Min 13-inch Max 22-inch from bottom of frame to the ground.
23. Can crease fenders and quarters.
24. No double skinning of body.
25. All bodies will be drilled.
26. Body can be welded solid. Trunk can be U-shaped. Must have hole cut in the trunk lid.
27. May bolt or wire hood in 6 places. Hoods must have a 12x12 hole.
28. Core support may be wired to front bumper. No wire in front of radiator.
29. When welding trunk and doors, no wider than 3-inch x ½-inch thick metal.
30. Roll over bars are mandatory.
31. Front and rear windshield bars are mandatory.
32. 4-point cage, door bars can be inside the doors. Can have 4 down leg bars attached to the frame, welded straight to frame.
33. Dash bar must be 5-inch from firewall and 5-inch up from floor board.
34. Any 5 lug rear-end, can run slip shafts. Can run rear end braces but cannot strengthen car in any way.
35. Tire Rule: Round and black
36. Can run two batteries. Must be secured and covered.
37. All frames will be scoped.
38. Can run passengers. Additional $25 fee.
39. BEE SPRING MOTORSPORTS WILL NOT BE RESPONSIBLE FOR LOST, STOLEN, OR DAMAGED ITEMS OR PROPERTY AT ANY EVENT, ARE NOT RESPONSIBLE FOR ANY ACCIDENTS OR INJURIES OF ANY TYPE DURING ANY EVENT. WE RESERVE THE RIGHT TO REJECT ANY ENTRY FOR ANY OR NO REASON!!
*********************************************************
MINI CAR DEMOLITION DERBY RULES~ Any year 4 or 6-cylinder with 105.5-inch wheel base or less.
~ 109-inch wheel base for front wheel drive.
~ BUILDING SAME AS BIG CAR RULES!!
Saturday; April 6th @ 5 PM CST
$1500 Purse
(based on 20 cars)
1st Place - $800 ~ 2nd Place - $400 ~ 3rd Place - $300
$40 Entry Fee
$500 PURSE STOCK MINI CAR DEMO
1ST - $250 ~ 2ND - $150 ~ 3RD - $100
$40 Entry Fee (based on 10 cars)
LawnMower Racing & LawnMower demolition derby ~ 100% Payback
Gates open at Noon
Gate Admission: $8
Ages 6 – 12 ~ $5
5 & Under ~ Free
For more information, please call Elvis Lindsey 270-246-1432
"LIKE" Bee Spring MotorSports on Facebook for updates
BEE SPRING MOTORSPORTS BIG CAR MODIFIED DEMOLTION DERBY RULES
~ Any year sedan or wagon (NO sedagons or imperials)
1. Helmet, eye protection, and seat belts must be worn at all times.
2. Long sleeve shirts are required.
3. Max 5 mph in pit area.
4. ANY problems/misunderstanding/or protest must be addressed before the drivers meeting.
5. Any questions, call first. IF IT DON’T SAY YOU CAN DO IT, DON’T DO IT!!!
6. Officials decisions are final!
7. All glass, plastic, and interior must be removed before arriving at the derby.
8. NO ALCOHOL ALLOWED ON PREMISSIS!!
9. ANY DRIVER, PIT CREW, FAMILY MEMBER, GIRLFRIEND/BOYFRIEND, ETC THAT FIGHTS OR ARGUES WITH ANY OFFICIAL OR OTHER DRIVERS WILL CAUSE THEIR CAR AND DRIVER TO BE DISQUALIFIED AND ESCORTED OUT!
10. You are allowed 8 plates per car!! If any more are found, you will cut them!!
11. Hump plates must be max 22-inch long x max ¼-inch thick and contour to the frame.
12. Kickers allowed to A-frame OR distributor protector. From dash bar to top side of frame behind A-arms OR a kicker from dash bar to distributor protector. Cannot be attached to distributor protector.
13. Can change body bolts. Must be a 1-inch gap between body and frame.
14. All-thread through cradle and hood.
15. Can run loaded bumpers, any style bumper. No extreme points must be less than 8-inch point from front flat surface.
16. Can weld seams from A-frame out.
17. Can run 12-inch bumper shocks. Must stay inside the frame.
18. No pinning of the frames.
19. Can lock suspension by welding A-frame solid.
20. Tilt fords by cutting flap and re-welding only.
21. Can run solid suspension in the back, cannot convert coil to leaf springs.
22. NO wedged cars. Must be Min 13-inch Max 22-inch from bottom of frame to the ground.
23. Can crease fenders and quarters.
24. No double skinning of body.
25. All bodies will be drilled.
26. Body can be welded solid. Trunk can be U-shaped. Must have hole cut in the trunk lid.
27. May bolt or wire hood in 6 places. Hoods must have a 12x12 hole.
28. Core support may be wired to front bumper. No wire in front of radiator.
29. When welding trunk and doors, no wider than 3-inch x ½-inch thick metal.
30. Roll over bars are mandatory.
31. Front and rear windshield bars are mandatory.
32. 4-point cage, door bars can be inside the doors. Can have 4 down leg bars attached to the frame, welded straight to frame.
33. Dash bar must be 5-inch from firewall and 5-inch up from floor board.
34. Any 5 lug rear-end, can run slip shafts. Can run rear end braces but cannot strengthen car in any way.
35. Tire Rule: Round and black
36. Can run two batteries. Must be secured and covered.
37. All frames will be scoped.
38. Can run passengers. Additional $25 fee.
39. BEE SPRING MOTORSPORTS WILL NOT BE RESPONSIBLE FOR LOST, STOLEN, OR DAMAGED ITEMS OR PROPERTY AT ANY EVENT, ARE NOT RESPONSIBLE FOR ANY ACCIDENTS OR INJURIES OF ANY TYPE DURING ANY EVENT. WE RESERVE THE RIGHT TO REJECT ANY ENTRY FOR ANY OR NO REASON!!
*********************************************************
MINI CAR DEMOLITION DERBY RULES~ Any year 4 or 6-cylinder with 105.5-inch wheel base or less.
~ 109-inch wheel base for front wheel drive.
~ BUILDING SAME AS BIG CAR RULES!!