Post by alicia37 on Oct 15, 2013 5:13:41 GMT -5
2013 Grayson Co KY Fall Clean Up Derby
October 19th, 2013 at 3pm CST
Grayson County Fair Grounds
**Entry Fees**
All cars (big,mini, & powder puff) $40
Mowers $20
Power Wheels $10
Power Wheels Derby- 100% Payback
2 Classes
-2, 3, & 4 Year olds
-5, 6, & 7 Year olds
Powder Puff- 100% Payback
Lawn Mowers- 100% Payback
Mini Cars- 100% Payback
Big Cars-
1st -$1,500
2nd-$600
3rd-$300
4th-$200
Mini Car and Lawn Mower classes will be the same as they were for Grayson County Fair Derby!!!
**PASSENGERS ALLOWED IN POWDER PUFF ONLY!!**
-If ANY questions regarding the derby or rules, Contact Bud Woodcock, (270) 246-1202.
--RULES--
1. Any American made wagon or sedan
2. Helmet and eye protection must be worn
3. Car must be stripped out and gas tank removed
4. Motor swaps are allowed
5. Distributor protectors and engine cradles allowed- Firewall must be cut out if distributor protector is ran
6. Only 2 chains permitted on engine, straight down off of heads
7. Gas tank protectors are allowed but NO wider than 24" and not to be welded to hump, if so you will cut
8. 4 point cage, NO down legs. Side bars can be 12" past door post
9. Can run straight or slanted roll bar, may be welded to frame. THIS IS THE ONLY BAR THAT CAN BE WELDED OR TOUCHING FRAME. Slanted above roll cage only.
10. Front windshield bars allowed, NOT to be welded or connected to the distributor protector. Rear window bar may run from roof to speaker channel ONLY, not to trunk lid or roll bar
11. Battery/batteries in passenger floor board and MUST be covered
12. Bumper shocks may be welded. Can run homemade shocks, but NOT to be longer than 8". NO QUESTIONS ASKED. No rear bumper brackets on front of car
13. Bumpers are interchangeable. Loaded bumpers are allowed. NO homemade bumpers allowed at all! NO WEDGE OR RAMP CARS ALLOWED! Quarters must be straight
14. Bumper height 22" tall maximum, 18" short minimum
15. Doors may be welded solid and trunk may be welded solid, MUST have 12x12 hole cut in trunk lid. If no hole, YOU WILL CUT ONE. Use 3" flat stock no thicker than 1/4" rain channel and seams only
16. Body bolts may be changed using up to 1" bolts and 3" MAX washers inside frame only. Front two may run up through hood. Wire 2 places from bumper to core support may be in front of radiator.
17. Fenders and quarters may be bolted up to 6 places MAX per wheel well
18. You may reinforce tie rods, drag link, and trailing arms
19. Frame seams may be welded from A-frames forward only. Top only, no wider than 1/2"
20. Suspension does not have to bounce, can run solid suspensions but do not go overboard on welding A-frames. If excessive YOU WILL CUT TO SUIT! No inside body seam welding
21. No coil spring to leaf spring conversions. Flat spring cars are allowed NO MORE than 9 springs and must be staggered, not the same length
22. You may run all thread for shocks but can not strengthen car
23. You can run 22" by 1/4 thick hump plates and have to be contour with the frame on the outside of the frame only! Must be centered with hump
24. NO PLATES on fresh cars other than hump plates. No extreme cross-members
25. On PRE-RAN cars, you may have 3 plates per side counting hump plates. 3x3x1/4 MAX
26. Fans have to be covered at all times
27. Any kind of tire is allowed
28. Any kind of rear end allowed as long as it is 5 lug
29. Can pitch a ford by bending at cross- member or cutting straps and pulling down, weld straps ONLY back. No added metal what so ever on pitching '03 and up Fords
30. If Ford does not have gussets, you can add gussets, use 1" by 1" tubing or angle iron ONLY, nothing else
31. If you second guess or wonder on any of these rules, DON'T DO IT!
32. All judges decisions are FINAL! If you want to talk reasonably, we will talk. If your fan club/pit crew comes onto the track YOU WILL BE DISQUALIFIED and all prize money revoked!
33. Safe and reasonable driving in the pits!